Lanternas Traseiras para Kia Sportage

Tail Lights for Kia Sportage

Protect your Kia vehicle by clearly displaying your intent to brake. With replacement taillights for the Kia Sportage easy to install and even easier to find, ensuring the functionality of these vital components certainly doesn’t have to be a chore. Sort through the various choices of tail lights for your Kia Sportage model, and find ones that will complement your Kia and your style.

Two types of lighting technologies control the vast majority of the market share for your Kia Sportage taillights: high-intensity discharge (HID) bulbs and light-emitting diodes (LED). HID bulbs use discharged gas and tungsten electrodes to manifest a powerful light-producing electric arc inside a glass housing. These types of lights are rated to last between 1,000 and 2,000 hours. LED lights run cool, take up a tiny amount of space, and are incredibly energy efficient. These types of automotive lights are comprised of compound semiconductor materials and are rated to last an average of 50,000 hours.

When attending to a cracked lens or upgrading to LED taillights, it’s often necessary to remove both taillight assemblies and install replacements. Installing new taillight assemblies in your Kia follows a series of straightforward steps that entail the use of basic shop tools. The exact steps required to replace the taillight assemblies in your Sportage may vary based on the year of manufacture, so consulting a model-specific service manual is advised.

1. Turn off the engine and open the tailgate. Pick a side to start with.
2. Locate and remove the two bolts holding the taillight assembly in place. Pull the assembly backward to gently pry it loose from the housing.
3. Press the clips to disengage the electrical harness. Discard the old assembly.
4. Position the new assembly into place and engage the electrical harness. Push the assembly into the cavity and insert the bolts to lock it in place.
5. Repeat these steps for the opposite side to complete installation.

Depending on the year it was manufactured, your Sportage SUV may also be equipped with two long and thin taillights embedded in the rear bumper. When it comes time to replace these auxiliary brake indicator lights, grab a socket wrench and a flashlight and follow these simple steps to remove the old parts and get started with replacement assemblies.

1. Assuming that you’re replacing both assemblies, pick a side to start with and turn off the engine.
2. Use a creeper or a similar tool to lower yourself under the rear bumper. Use a flashlight to locate the back side of the rear bumper light assembly.
3. Using a socket wrench, remove the bolts holding the assembly in place. Disconnect the electrical harness and remove the old assembly.
4. Position the new assembly into place. Connect the electrical harness and securely bolt the new rear bumper light assembly into position.
5. Repeat these steps for the opposite side to complete installation.