Botões de Mudança e Botas para Ford Ranger

Ford Ranger Shift Knobs and Boots

Several model years of the Ford Ranger have offered drivers the option of a manual or automatic transmission. The manual versions come with a gear shift assembly mounted in the floor between the driver’s and passenger’s side seats and covered by either a plastic or fabric boot sleeve. Replacing the knob and boot when they become damaged or worn-out helps to preserve the functional and cosmetic condition of your truck.

The shift knob is held in place by the metal threads of the gear stick, and the boot is attached to the floor by a plastic bezel. Follow the steps listed below:

1. Turn the knob counterclockwise to remove it from the shifter.
2. Lift up the plastic bezel to detach it from the floor and then slide the boot sleeve off of the shifter assembly.
3. Slide the new boot over the gear stick and then press the plastic bezel into its place in the floor.
4. Position the new knob on the shifter and then turn it clockwise to fasten it into place.

If the knob or boot of your gear shift assembly is damaged or missing, it should be replaced immediately to help prevent faulty shifting, transmission damage, and stalling. These items are used heavily during the normal operation of your vehicle, so they typically need to be replaced every 50,000 to 60,000 miles or 5 to 6 years, depending on how often you drive.

There are Original Equipment Manufacturer’s parts and aftermarket upgrades for all model years of the Ranger. OEM knobs and boots are designed to look and function exactly like the factory parts, so replacing worn-out items with these products will help to restore your truck to its original condition. Aftermarket upgrades are designed to match the interior of your vehicle and provide an additional decorative accent as well as improved performance.

A fully functional shift knob is essential for safe driving and smooth operation of the transmission. The boot sleeve prevents objects and debris from becoming trapped in the gear shift assembly. Responsive shifting helps you avoid accidents and prevent your engine from stalling when you have to suddenly stop your Ranger.

By cleaning the knob and boot daily with a mild solution of soap and water, you can help to preserve the condition of these items for their full lifespan. After cleaning dirt, oil, and other contaminants from the gear shift assembly, dry it off with a clean cloth to prevent stains and streaks from forming.