Toyota Camry Car or Truck Interior Console Parts
Many people can enjoy being able to update and enhance their own vehicles and parts on their Toyota Camry. One piece of a vehicle that may need to be updated due to wear and tear over time is the center console. It is important to know how to replace your center console, and it is also important to know about the different purchasing options for them.
What are some brands that manufacture consoles?Some people like to go with the factory manufacturer and purchase a new center console from Toyota directly. However, if you are looking for an aftermarket or custom center console for your Toyota Camry, there are numerous options available on the market. Some of the most commonly seen brands that manufacture a vehicles center console replacement parts are:
- Boost Waves
- Eonon
- Super PDR
- NAPA
- XUKEY
- Fly5D
- Leather
- Synthetic leather
- Cloth
- Plastic
- Vinyl
- Black
- White
- Gray
- Tan
- Beige
- There are numerous other options for center console colors for the Camry sedan. You can customize your own center console based on the interior color of your car and your own preference.
- You will want the car to be stationary so that you can ensure that the arm rest is properly aligned. When in doubt, always thoroughly read the installation instructions for your Toyota Camry parts before you begin a new project.
- Begin by removing the old arm rest. It should be connected by a series of screws or bolts that hold the arm rest in to place. Use a 10 or 15 Torx bit to remove the screws. There may also be a few retainer tabs that keep the console in position; remove these as well. The arm rest should now detach and you should be able to carefully pull it right off.
- Next, make sure that the console is in proper placement. Align the new arm rest with the screws and bracket that the old arm rest was positioned in. Reinstall the arm rest by placing the bolts back in the same manner that you removed the original piece. Test out your new arm rest to ensure it is properly functioning. The arm rest should open and close easily in the same fashion as the old one.