Mini Cooper Oil Filters
When it is time to change the oil in your Mini Cooper, one of the most important things you will need is an oil filter. This filter helps keep the oil in your car clean by filtering out any debris or contaminants that may prevent your engine from running optimally. When purchasing oil filters for your Mini Cooper, it is important to get the proper type that is made for your car.
How often should you change a Mini Cooper’s oil filter?The oil filter should be replaced at every oil change. You should change your oil every 3,000 miles or every three months, whichever one comes first.
What type of filter should you use for a Mini?The type of filter you will need will depend on the year, model, and engine type of your vehicle. You can get filters from the original equipment manufacture of your vehicle, or you can get one by STP, Fram, and other auto parts companies will also fit your vehicle and work just as well. It is important to use a high-quality, synthetic oil along with the proper filter to extend the life of your engine.
How do you check the oil in your Mini Cooper?Checking the motor oil in a Mini is easy and requires no tools.
- Begin by running your car for a few minutes to get the engine warm.
- Turn off the Mini and open the hood.
- Remove the dipstick and use a rag or paper towel to wipe fluid off the end.
- Insert the stick again and remove. Make sure the oil fluid level is between the two markings.
- Begin by driving your Mini up on ramps. The oil drain is located on the right-hand side of the vehicle.
- Use a torque wrench to remove the plug and let the engine oil drain.
- Use a socket or wrench to remove the casing and take out the old filter. Carefully remove the old O-ring in case you break the new one.
- Insert your new one and replace the housing. Dont forget to put all the screws back in.
- Add the new motor oil. It will usually take four to five bottles. Make sure you are using the correct type and amount for your car. This information can be found in your owner’s manual.
- Check the dipstick to make sure the engine oil levels are correct after the oil change, and adjust if necessary.