Exterior Antennas for Pontiac Vibe
If you want to stay entertained with music or up to date with the news, then it is necessary to have a functioning antenna on your Pontiac Vibe. The function of the exterior antenna for Pontiac Vibe vehicles is to pick up radio waves sent from nearby radio stations. The cars receiver then turns that signal into the sound that youre accustomed to hearing.
What are the different types of antennas for a Vibe?- Mast style: These will have a base on which the mast can anchor. The mast is typically a simple black rod although there are other versions available, including ones that look like bullets, arrows, and blades. They are also available in various lengths. Longer ones may get better reception, but you need to have the necessary overhead clearance to use these.
- Shark fin style: While some people prefer their sleek look and lower profile, they are also known for their durability; they can stay on during all types of car washes or when you have low overhead clearance. They can come in many colors, with black being a popular choice since it can match all Pontiac Vibe vehicles.
For a mast antenna on a Pontiac, you can untwist your old piece and screw in your replacement one. It takes only a matter of seconds, assuming the base is still intact. However, if the base on your Pontiac Vibe car has been damaged, youll have to replace it as well.
- Take off the two buttons toward the rear of the roof liner. Pull down slightly on the liner.
- Remove the rear courtesy light by taking off the clips and prying it off using a plastic trim removal tool.
- Take off the two bolts that hold up the trim panel. Remove that panel as well as any handles or hooks that are attached to it.
- Remove any electrical wires, paying attention to where they were connected.
- Use a wrench to remove the nut that holds the base in place.
- Use the nut to mount your new antenna base, and reattach the wires.
- Repeat the other steps in reverse order to get your liner and other parts back into position.
You can make this quick and easy change if you want to give your Pontiac Vibe a different look. A shark fin will typically have a universal fit, so it can go on any year or model, regardless of whether its a standard Vibe or a Pontiac Vibe GT.
- Take off the mast.
- Heat up the adhesive material using a blow-dryer and attach it to the base of the new antenna.
- Screw in the nut that came with your kit into the anchor point on your base.
- Attach the wires to the other end of the nut.
- Use your dryer to heat up the other side of the adhesive. Carefully place the shark fin on top of your vehicle. Press down firmly so that the tape can adhere to the roof of your Pontiac Vibe.